2.5'' SSD

SQF-2020

SQF-2020 is fully compliant with SATA III, standard 2.5" form factor and FIPS 140-2 certification, delivers security features and with software add-on functions. SQF-2020 has wide range of capacity with 3D TLC solutions with read/write performance up to 560 and 530MB/s.
SQF-S25 640

Advantech SQFlash 2.5" 640 is fully compliant with SATA III (6.0Gb) and MO-300 2.5" specification, delivers security features and with software add-on functions. SQF-S25 640 has wide range of capacity with MLC, UltraMLC, 3D TLC and sTLC solutions which read / write performance up to 560 and 495MB/s.
SQF-S25 650

Advantech SQFlash 2.5" 650 is fully compliant with SATA III (6.0Gb) and TCG OPAL, delivers security features and with software add-on functions. SQF-S25 650 has various temperature range and high endurance sTLC product selections, with read / write performance up to 550 and 510MB/s.
SQF-S25 660

Advantech SQFlash 2.5" 660 is compliant with SATA III (6.0Gb) ,embedded with SQ Manager and SQLog and SQAnalyzer for diagnosis. SQF-S25 660 support -20~75℃ and can withstand peak up to -40℃ or 85℃ for 1hr. This is the most compact and valued SATA SSD selection.
SQF-S25 660BR

Advantech SQFlash 2.5" 660 is compliant with SATA III (6.0Gb). Moreover, the key feature of SQF 660BR is the single-device which enables on site recovery of operating system by simple procedure such as GPIO triggering or application commands.
SQF-S25 830

Advantech SQFlash 830 series 2.5” SATA-SSD (SQF-S25 830) delivers all the advantages of Flash Disk technology with the Serial ATA III (6.0Gb) interface, fully compliant with standard 2.5-inch form factor. The SATA SSD is based on a standard SATA 7-pin interface for data segment and 15-pin for power segment, designed to operate at a maximum operating frequency of 300MHz with 30MHz external crystal. Its capacity could provide a wide range up to 2TB. Moreover, it can reach up to 550MB/s read and 530MB/s write high performance based on Toggle 2.0 MLC flash (with 512MB DDR enabled and measured by CrystalDiskMark v3.0).
SQF-S25 840

Advantech SQF-S25 840 is fully compliant with SATA III (6.0Gb) and standard 2.5" form factor, delivers security features and with software add-on functions. SQF-S25 840 has wide range of capacity with 3D TLC and sTLC normal and wide-temp. solutions with read/write performance up to 560 and 540MB/s.
SQF-S25 840L

Advantech SQF-S25 840L is fully compliant with SATA III (6.0Gb) and standard 2.5" form factor. SQF-S25 840 has wide range of capacity from 480G~3.8T, with read/write performance up to 560 and 540MB/s.
SQF-S25 840V

Advantech SQFlash 840 series 2.5” SATA-SSD delivers all the advantages of Flash Disk technology with the Serial ATA III (6.0Gb) interface. Moreover, SQFlash 840V is equipped with super capaciter that can extend the time for data processing and prevent data loss when there's sudden power off.

2.5'' SSD

SQF-2020 is fully compliant with SATA III, standard 2.5" form factor and FIPS 140-2 certification, delivers security features and with software add-on functions. SQF-2020 has wide range of capacity with 3D TLC solutions with read/write performance up to 560 and 530MB/s.

Advantech SQFlash 2.5" 650 is fully compliant with SATA III (6.0Gb) and TCG OPAL, delivers security features and with software add-on functions. SQF-S25 650 has various temperature range and high endurance sTLC product selections, with read / write performance up to 550 and 510MB/s.

Advantech SQFlash 2.5" 660 is compliant with SATA III (6.0Gb) ,embedded with SQ Manager and SQLog and SQAnalyzer for diagnosis. SQF-S25 660 support -20~75℃ and can withstand peak up to -40℃ or 85℃ for 1hr. This is the most compact and valued SATA SSD selection.

Advantech SQFlash 2.5" 660 is compliant with SATA III (6.0Gb). Moreover, the key feature of SQF 660BR is the single-device which enables on site recovery of operating system by simple procedure such as GPIO triggering or application commands.

Advantech SQF-S25 840 is fully compliant with SATA III (6.0Gb) and standard 2.5" form factor, delivers security features and with software add-on functions. SQF-S25 840 has wide range of capacity with 3D TLC and sTLC normal and wide-temp. solutions with read/write performance up to 560 and 540MB/s.

Advantech SQF-S25 840L is fully compliant with SATA III (6.0Gb) and standard 2.5" form factor. SQF-S25 840 has wide range of capacity from 480G~3.8T, with read/write performance up to 560 and 540MB/s.

Advantech SQFlash 840 series 2.5” SATA-SSD delivers all the advantages of Flash Disk technology with the Serial ATA III (6.0Gb) interface. Moreover, SQFlash 840V is equipped with super capaciter that can extend the time for data processing and prevent data loss when there's sudden power off.