Serial Surge Suppressors - ULI-240 Series

The surge suppressors protect against lightning strikes and other voltage disturbances in three stages: gas discharge tube, series resistor, and TVS.

BB-232HESP

Model 232HESP is a three-stage surge protector that protects against lightning strikes and other types of voltage disturbances with three stages of protection for each line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). The surge protector is housed in a tough metal, panel mount case with a protected signal ground connection and dedicated chassis ground lug.In order to work properly, it is important to have a good connection between the #10 screws and a solid earth ground. Two terminal posts and two metal mounting brackets provide a good ground connection.
BB-422HESP

Model 422HESP is a three-stage surge protector that protects against lightning strikes and other types of voltage disturbances with three stages of protection for each line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). The surge protector is housed in a tough metal, panel mount case with a protected signal ground connection and dedicated chassis ground lug.In order to work properly, it is important to have a good connection between the #10 screws and a solid earth ground. Two terminal posts and two metal mounting brackets provide a good ground connection.
BB-485FPP

Single stage surge protectors offer a high degree of protection with Transient Voltage Suppressors (TVS) for each protected line. Model 485FPP has 600W Transient Voltage Suppressors to clamp voltages without adversely affecting normal RS-422/485 data. Fast-acting 125 mA PCB fuses to protect RS-422 and RS-485 circuits against transient voltages that are too long or too large for normal suppression. The 485FPP has 4 wires and terminal blocks for easy installation inline between the data cables – as close as possible to the serial port. Once a fuse is blown, the unit should be disposed and replaced.
BB-485HESP

Model 485HESP is a three-stage surge protector that protects against lightning strikes and other types of voltage disturbances with three stages of protection for each line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). The surge protector is housed in a tough metal, panel mount case with a protected signal ground connection and dedicated chassis ground lug.In order to work properly, it is important to have a good connection between the #10 screws and a solid earth ground. Two terminal posts and two metal mounting brackets provide a good ground connection.
BB-HESP4DR

BB-HESP4DR protects from lightning, surges, voltage disturbances with 3 stages on each line: gas discharge tube, series resistor and transient voltage suppresser. Five RS422/485 signals on TBs with 6.8V clamping voltage. Must have good connection between #10 grounding screw and solid earth ground.

Serial Surge Suppressors - ULI-240 Series

BB-232HESP

BB-422HESP

BB-485FPP

BB-485HESP

BB-HESP4DR

BB-HESP4DR protects from lightning, surges, voltage disturbances with 3 stages on each line: gas discharge tube, series resistor and transient voltage suppresser. Five RS422/485 signals on TBs with 6.8V clamping voltage. Must have good connection between #10 grounding screw and solid earth ground.